The only guitar preamp you will ever need in your studio.
Introducing the AMT ProStudio Series SS-10 3 channel rackmount
preamp. The AMT SS-10 uses completely tube based 4-stage
preamplification (2 ?12??7) which enables you to obtain a wide
range of sounds; resulting from aggressive modern metal to
classic 1980s sounds, to overdriven blues, to chunky crunchy
rhythm, to super saturated screaming instrumental lead tones.
Super-slim 1-rackspace unit only 3.5 inches deep. Mount in
your studio cabinet or even on your pedalboard!
SS-10 is separated into 3 individual channels:
Clean, Crunch, and Lead. Each of the channels may be
accessed and switched via the red selector buttons or
also by the optional AMT FS-2 foot switch for hands free
operation. Each channel is designed with is own gain
and level controls, which makes fine tuning extremely
easy; and a final master volume control to adjust the
total overall output db of the unit. The SS-10 has three
outputs; Amp Out, Cab Sim Out, and Headphones Out
for easy monitoring in the studio. There in a guitar
signal input jack on both the front and back of the unit,
and also an FX loop Send and Return with level knob.
CLEAN CHANNEL will provide you with anything from smooth warm driven tube
sounds, to bright and shimmering clean tones. This is capable via the 3 tone
control knobs Low, Mid, and High; and also by help of the special EQ adjustment
switch. The switch offers 3 unique tone stacks from where the clean channel's
tone starts with. Then from one of the 3 positions, the tone can be even further
modified with the control knobs. You will find this useful in getting a wide variety
of clean guitar styles. Useful also in compensating for various pickups from
different guitars.
CRUNCH CHANNEL is used for those semi-clean to mean sounds. Blues overdrive, classic rock drive, and vintage 80s hair metal crunch; all easily dialed in on the SS-10's Crunch channel. Controls of the Crunch channel include Gain, Level, Low, Mid, High, Presence, and a 3 position selectable Treble Shift switch.
LEAD CHANNEL is for those mean to EXTREME+ guitar tones. Blistering, screaming, pure tube metal distortion powerhouse. Perfect for aggressive guitarists and drop tuners! The SS-10 lead channel will please even the discriminating players who are never satisfied with the amount of gain. AMT knows heavy guitar technology and the SS-10 will provide more than enough! Similar to the Crunch channel, the Lead also provides control over Gain, Level, Low, Mid, High, Presence, and has a Treble Shift switch. Take your guitar to low B, we're ready!
SPECIFICATIONS:
- Tubes: 12AX7 (ECC-83) x 2 (EH Stock Tubes)
- Input Impedance Rear Panel: 1MOhm
- Input Sensitivity Rear Panel: -10dB
- Input Impedance Front Panel: 1MOhm
- Input Sensitivity Front Panel: -20dB
- Output Impedance: 10kOhm
- Headphone Output: 10kOhm at .125 W
- Power Voltage: 12vDC (-)center
- Power Consumption: 600mA or .6A
AMT SS-10 Audio Demo 1 - Clean
AMT SS-10 Audio Demo 2 - Crunch Sample 1
AMT SS-10 Audio Demo 3 - Crunch Sample 2
AMT SS-10 Audio Demo 4 - Lead Sample 1
AMT SS-10 Audio Demo 5 - Lead Sample 2
AMT Electronics SS-10 ProStudio Series Rackmount Tube Guitar Preamp: